Directional Control Valves
Air Cylinders
Rotary Actuators/Air Grippers
Vacuum Equipment
Air Preparation Equipment
Modular F.R.L.
Fittings and Tubing，Flow Control Equipment
Sensors/Switches
0102030405
ATCL, ATCM series three-axis cylinders
Specifications
| Inner diameter(mm) | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Action form | Double-action type | ||||||||||||
| Working medium | Air(through40μmFilter above) | ||||||||||||
| Operating pressure range | 0.15~0.7MPa(22~100psi) | 0.15~1.0MPa(22~145psi) | |||||||||||
| Ensure pressure resistance | 1.2MPa(175psi) | 1.5MPa(215psi) | |||||||||||
| Operating temperature | -20~70℃ | ||||||||||||
| Operating speed range | 50~500mm/s | 30~500mm/s | 50~400mm/s | ||||||||||
| Stroke tolerance range | ≤100+1 >100+5 | ||||||||||||
| Buffer type | Crash pads | ||||||||||||
| Non-rotation accuracy[Note1] | Linear bearings | - | ±0.08° | ±0.07° | ±0.06° | ±0.05° | ±0.04° | ||||||
| Copper sleeve bearings | ±0.1° | ±0.10° | ±0.09° | ±0.08° | ±0.06° | ±0.05° | |||||||
| Pipe diameter[Note2] | M3X0.5 | M5X0.8 | PT1/8 | PT1/4 | PT3/8 | ||||||||
[Note1]The non-rotation accuracy is the angle that the cylinder fixing plate can rotate when the cylinder is fully retracted;
[Note2]Tube thread type PTtooth,Gtooth, NPTTeeth available.
Journey
| Inner diameter(mm) | Standard itinerary | Maximum stroke |
| 6 | 5 10 15 20 | 20 |
| 10 | 5 10 15 20 25 30 | 30 |
| 12 | 10 20 25 30 40 50 60 70 75 80 90 100 125 150 | 150 |
| 16 | 10 20 25 30 40 50 60 70 75 80 90 100 125 150 175 200 | 200 |
| 20 25 | 20 25 30 40 50 60 70 75 80 90 100 125 150 175 200 225 250 | 250 |
| 32 40 50 63 | 25 30 40 50 60 70 75 80 90 100 125 150 175 200 225 250 | 250 |
| 80 100 | 25 30 40 50 60 70 75 80 90 100 125 150 175 200 225 250 | 250 |
[Note] Non-standard stroke cylinders that differ 1 to 5 mm from the standard stroke are modified from the previous level standard stroke cylinders and have the same overall dimensions.
For example, a non-standard stroke cylinder with a stroke of 86 is modified from a standard cylinder with a standard stroke of 90, and its external dimensions are the same as that of the standard cylinder; however, a non-standard stroke cylinder with a stroke of 84 can only be ordered as a non-standard cylinder because it differs by 6mm from the previous standard stroke of 90.
For example, a non-standard stroke cylinder with a stroke of 86 is modified from a standard cylinder with a standard stroke of 90, and its external dimensions are the same as that of the standard cylinder; however, a non-standard stroke cylinder with a stroke of 84 can only be ordered as a non-standard cylinder because it differs by 6mm from the previous standard stroke of 90.
Ordering Code
ATCL, ATCM series three-axis cylinders Ordering codeProduct size
Fixing method
Top screw fixation (Ф6~Ф100)
Bottom screw fixing (φ12~φ100)
Bottom T-slot fixing (φ12~Φ100)
Back screw fixation (φ6~φ100)
| Cylinder diameter/Symbol | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| A | 20.5 | 23 | 41 | 46 | 54 | 64 | 78 | 86 | 110 | 124 | 156 | 188 | |
| D (Min) |
TCM | No need | No need | 10 | 12 | 13 | 20 | 20 | 20 | 20 | 20 | 30 | 一 |
| TCL | 一 | 一 | 8 | 10 | 10 | 13 | 一 | 30 | |||||
Allowable load and torque
Allowable load
ATCM6, 10 allowable load
ATC12~100 allowable load
For other cylinder operating speeds, multiply the value of the curve when V=400mm/s by the coefficient in the table below to obtain an approximate value of the allowable load mass.
Maximum allowable torque
| Inner diameter | Type | Stroke (mm) | |||||||||||||||||||
| 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | 70 | 75 | 80 | 90 | 100 | 125 | 150 | 175 | 200 | 225 | 250 | ||
| Maximum allowable torque unit: Newton meter (N m) | |||||||||||||||||||||
Internal structure and main parts materials
| Serial number | Name | Serial number | name |
| 1 | Fixed plate | 12 | Special 0 order |
| 2 | guide rod | 13 | O-ring |
| 3 | Ontology | 14 | back cover |
| 4 | C-shaped buckle | 15 | piston rod |
| 5 | front cover | 16 | piston |
| 6 | Crash pads | 17 | Magnet seat |
| 7 | Special 0 order | 18 | Magnet gasket |
| 8 | Hexagon socket bolts | 19 | magnet |
| 9 | O-ring | 20 | Hexagon socket set screws |
| 10 | Linear bearings/copper sleeve bearings | 21 | Hexagon socket set screws |
| 11 | C-shaped buckle | 22 | Spacer |
External specifications
ATCM6/ATCM10
ATCL/ATCM12~63
FAQ
-
Q: What are the characteristics and functions of the guide rods and bearings?
A: The two guide rods are made of special bearing steel and guided by either linear bearings or bronze bearings. This design gives the cylinder high resistance to torsional forces and lateral loads. The steel ball linear bearing is suitable for cylinder thrust applications or applications requiring high precision and high load capacity, and performs particularly well in environments requiring low-friction motion. The bronze plain bearing is suitable for cylinder braking applications and other applications subject to radial loads. Compared to conventional brake cylinders, it offers over twice the resistance to lateral impact and greater torsional stiffness.