0102030405

ASDA20×20S ASDA series ultra-thin cylinder

・Compliant with company standards;

・The cylinder body, rear cover, piston, and piston rod utilize a riveted structure for compactness and reliability;

・The inner diameter of the cylinder is rolled and then hard-anodized for wear resistance and durability;

・The piston seal utilizes a special-shaped, bidirectional seal structure, which is compact and provides oil storage;

・The compact structure significantly reduces air conditioning installation costs;

・Magnetic switch slots are located around the cylinder body for easy installation of the sensor switch;

・A variety of cylinder sizes are available.

Specification code	ASDA20×20S
Action form	Double-action type
Working medium	Air (filtered with a filter of 40 μm or more)
Operating pressure range	0.15 - 1.0MPa(22 - 145psi)(1.5 - 10.0bar)
Ensure pressure resistance	1.5MPa(215psi)(15bar)
Operating temperature	-20~70℃
cylinder diameter	20
journey	20
Pipe diameter	M5

Q: What is the maximum operating speed of the cylinder?

A: The double-acting ASDA20×20S cylinder has an operating speed range of 30-500 mm/s. The actual operating speed can be controlled by adjusting the intake air flow. For example, by installing a throttle valve at the intake port and adjusting the throttle opening, the cylinder's operating speed can be flexibly adjusted to meet the speed requirements of different operating conditions.

Q: Can this cylinder be used in dusty or humid environments?

A: The ASDA 20×20S cylinder is designed with a certain level of protection, but additional protective measures are recommended for dusty or humid environments. In dusty environments, a high-efficiency air filter can be installed in front of the cylinder's air inlet and cleaned regularly to prevent dust from entering and wearing out the cylinder's internal components. In humid environments, ensure that the air source is dried to remove moisture. Furthermore, a protective coating can be applied to the cylinder surface to prevent rust. If the environment is extremely humid or corrosive gases are present, a cylinder designed specifically for harsh environments may be required.