ANITVX2000 High Pressure Proportional Control Valve

Product Overview

1. Precision Engineered for Advanced Automation

The ANITVX2000 High-Precision Proportional Air Pressure Regulating Valve sets a new standard for intelligent pressure management in industrial automation. By converting a standard electrical input signal into a precisely proportional output pressure, it enables seamless, continuous control that is both responsive and remarkably stable.

2. Unmatched Performance Under Pressure

Engineered for the most challenging environments, the ANITVX2000 supports a maximum supply pressure of 5.0MPa and offers an adjustable control range from 0.01 to 3.0MPa. This wide range, combined with an exceptional flow capacity of 3000 L/min, makes it the perfect solution for heavy-duty applications requiring both high pressure and high flow. Its ±1% repeatability guarantees consistent, reliable performance cycle after cycle, minimizing process variation and ensuring product quality.

3. Designed for Versatility and Longevity

Application Spotlight

・Automated Pneumatic Test Stands

・Semiconductor Manufacturing Equipment

・Welding and Cutting Gas Control Systems

・Industrial Laser and CNC Machinery

・High-Precision Packaging and Material Handling

Technical Parameters

Model Number		ANITVX2030	ANITVX2030-X80
Minimum Supply Pressure		0.5 MPa or higher than the set pressure + 0.2 MPa
Maximum Supply Pressure		5 MPa (Note 2)
Set Pressure Range (Note 3)		0.01~3.0MPa
Power supply	Voltage	DC24V±10%
	Current Consumption	Below 0.12A
Input signal	Current Type (Note 4)	DC4~20mA,DCO~20mA(Convergence)
	Voltage Type	DC0~5V.DC0~10V
Input impedance	Current Type	500Ω以下
	Voltage Type	6~6.5KΩ (at room temperature)
Output signal (Note 5) (Monitoring output)	Analog output	DC 1~5V (output impedance approx. 1KΩ) Output accuracy ±6% or less (range)
		4~20mA (mass type) Load impedance 250Ω or less Output accuracy ±6% or less (range)
	Switch output	NPN open collector output maximum 30V, 80mA
		Hysteresis ±3% (range), self-diagnostic ±5% or less (range)
		PNP open collector output maximum 80mA
		Hysteresis ±3% (range), self-diagnostic ±5% or less (range)
Linearity		±1% or less (range)
Hysteresis Accuracy		1% or less (range)
Repeatability		±1% or less (range)	Set pressure: 0~0.9 MPa
			Set pressure: 0.9~3 MPa
Pressure Stability		1% or less (range)	Set pressure: 0~0.9 MPa
			Set pressure: 0.9~3 MPa
Sensitivity		±1% or less (range)
Temperature Characteristics		±0.12% or less (range)/℃
Output pressure display	Precision	±2% or less (range) ±1dig
	Smallest unit (Note 6)	MPa:0.01,kgf/cm²:0.1,bar:0.1,ps:1
Fluid used		Air, N2, O2, Ar
Ambient temperature and fluid temperature		0-50℃ (non-condensing)
Mass		Approx. 570g (excluding options)
Note 1) The above characteristic values ​​were measured using the piping system shown in Figure 1. Note 2) When using oxygen as the fluid, please use it with a maximum supply pressure below 1 MPa. Note 3) When using oxygen as the fluid, please use it with a maximum supply pressure below 1 MPa. Note 4) Not applicable to 2-wire DC 4~20mA. Requires a DC 24V power supply. Note 5) Choose either analog output or switch output. After selecting switch output, choose either NPN output or PNP output. When measuring DC 1-5V analog output with a load impedance below 100kΩ, the analog output accuracy may be less than ±6%. Note 6) Zero point and range are adjusted using the smallest unit of the output pressure display. Units cannot be switched. Note 7) This product is suitable for blowing. When used in applications other than blowing (driving, sealing), pressure control is not ideal.

Order Code