0102030405

A4V100 Two-position five-way reversing solenoid valve

・Aluminum alloy material, good durability, sliding column structure, sensitive response

・Special process, small resistance, low starting pressure, long service life

・High-quality seal, efficient lubrication

・Quick response, efficient action

product details

Model	A4V110-06
Working medium	Compressed air (filtered with a filter of 40μm or more)
Action	Manual direct control
Pipe diameter	Inlet = outlet = exhaust = 1/8
Number of positions	Two-position five-way
Effective cross-sectional area	12.0mm² (Cv=0.67)
Operating pressure range	0.15~0.8MPa
Guaranteed pressure resistance	1.2MPa
Operating temperature	-5~50℃
Body material	Aluminum Alloy
lubricating	Not required
Maximum operating frequency	5 times/second

(1) The pipe thread is available in G thread and PT thread.

(2) The highest operating frequency is in no-load state

Electrical performance parameters
Standard voltage	AC220V	AC110V	AC24V	DC24V	DC12V
Voltage range	AC±15%;DC±15%
power	3.5VA	3.5VA	4.0VA	2.5W	2.5W
Protection level	IP65
Power connection method	DINLubrication type, outlet type

description2

Q: What should be paid attention to during installation?

A: Make sure the fluid flow direction is consistent with the direction marked on the valve body; avoid severe vibration or impact; when wiring, confirm that the voltage matches the coil mark to prevent burning.

Q: Does it support corrosive fluid media?

A: The standard model is suitable for non-corrosive media. If it needs to contact corrosive liquids or gases, it is recommended to choose a customized model with special materials (such as stainless steel seals).